The underwater slurry pump is very helpful for our daily work, so when lifting and installing, it is necessary to strictly follow the operating specifications. Today, I will tell you what to pay attention to when lifting and installing the underwater slurry pump?
1. A soft object protection is required at the contact area between the steel wire rope and the pump body to avoid damage to the appearance of the pump or the occurrence of the steel wire rope being cut due to this reason, leading to danger.
2. In order to ensure the balance of the slurry pump, when lifting the belt motor and the horizontal pump with the same base, the lifting center needs to be near the coupling near the prevention and control of the bracket, and use the steel rope to pass through the vertical lifting hook link. Above the pump casing, it is still possible to get an auxiliary lifting steel wire rope between the lifting eye screw and the screw of the motor lifting eye and the lifting hook, It can guarantee more Factor of safety, and its main purpose is to ensure their balance.
3. When lifting without a base, it is necessary to use a hook on the side of the bracket near the center of gravity to link them together, in order to ensure that they are in a balanced state. However, one thing to note is that since the bracket cover can be disassembled, it is generally not recommended to use the pump separately as a whole, as it is more prone to unexpected situations and danger.
4. Split lifting, as we all know, when the slurry pump condenses and ruptures a bubble, the particle of the liquid will generate a high pressure and water pressure. The instantaneous water hammer can even penetrate a thick steel plate. When the bubble ruptures, the destructive effect will cause cavitation, which will cause certain damage and damage to many components, as well as strong vibration and noise, This can lead to a decrease in the original performance of the slurry pump, and in severe cases, it may even cause interruption or inability to operate the liquid.
二维码
