Diesel Engine Double Suction Split Casing Centrifugal Irrigation Pump

We always implement the value concept of taking technological innovation as the soul and quality as the guarantee, and strictly abide by the industry standards to manufacture theSingle Suction Multistage Water Pump,Boiler Multistage Water Pump,柴油消防泵雷竞技官网最新版. Our cooperation with our customers is not about short-term benefits, but about quality and common progress. We uphold the business philosophy of 'creating value for customers', and have won the trust and support of many customers with reasonable prices, excellent quality, and perfect services.

Double suction centrifugal pumpis suitable for water supply and drainage of factories, cities, mines, power stations, farmland irrigation, urban drainage and various water conservancy projects.

Installation requirements

1. Check the water pump and motor for damage.

2. The basic dimensions should conform to the installation dimensions of the pump unit.

Installation sequence

(1) Place the pump on the concrete foundation with anchor bolts, correct the level by adjusting the wedge-shaped pads in between, and tighten the anchor bolts to prevent walking.

(2) Pouring concrete between the foundation and the pump foot.

(3) After the concrete is dry, tighten the anchor bolts and recheck the level of the pump.

(4) Correct the coaxiality of the motor shaft and the water pump shaft. Make the two shafts in line, the tolerance of the different shafts on the outer circle of the two couplings is 0.1 mm, and the tolerance of the unevenness of the end face gap along the circumference is 0.3 mm (check after connecting the inlet and outlet pipes and trial operation respectively Once again, the above requirements should still be met) S-type single-stage double-suction pump.

(5) After checking that the axial direction of the motor is consistent with the direction of the pump, install the coupling stud of the coupling.

More to know:

1, The water inlet and outlet pipelines should be provided with separate supports, not to be supported by the pump body.

2, The joint surface between the pump and the pipeline should ensure good air tightness, especially the water inlet pipeline must be strictly airtight, and there should be no possibility of air in the device.

3, If the water pump is installed above the water inlet level, in order to start the irrigation pump, a bottom valve can generally be installed, or a vacuum water diversion method can also be used.

4, Between the Double Suction Centrifugal Pump and the outlet pipe, a gate valve and a check valve (generally less than 20 meters in height) may be installed. The check valve is installed behind the gate valve.

5, The installation dimensions of double-suction pumps and motors of split case are calculated with common motors. According to user needs or other motors actually selected, the installation dimensions of the motors should be calculated by the user.

We have now numerous great personnel members good at advertising, QC, and working with kinds of troublesome dilemma from the creation course of action for Diesel Engine Double Suction Split Casing Centrifugal Irrigation Pump. We have a first-hand source of goods, and we attain obvious advantages in quality and cost performance. Our company has a deep understanding of modern management.