Small But Power Mini Air Pump 2.5W for Tanks

Our competitive advantage is to utilize our advanced technology to reduce the cycle cost of products and provide customers with high-quality and low-costSlurry Transfer Pump,City Water Booster Pump,Horizontal Concrete Sludge Dredge Pump. We, with open arms, invite all interested buyers to visit our website or contact us directly for further information. We value quality as life, continuously introducing advanced production equipment, developing and training outstanding technical personnel. With years of focus and accumulation in the water treatment industry, our company already has a large number of experienced personnel, and constantly updates products and improves the quality. Welcomes all abroad close friends and retailers to ascertain collaboration with us.

Super Flow Submersible Pump

Applicable places for super flow submersible pump

1. Discharge of severely polluted wastewater from factories. 2. Drainage system of urban sewage treatment plant. 3. Sewage drainage stations in residential areas. 4. Drainage station of fire fighting system. 5. Sewage discharge from hospitals and hotels. 6. Municipal engineering and construction sites. 7. Attached equipment for exploration and mining. 8. Rural farmland irrigation with biogas digesters. 9. Water supply device of waterworks.

The use conditions ofsuper flow submersible pump

1. The temperature of the medium does not exceed 60°C, the weight is 1.0~1.3kg/dm3, and the PH value is in the range of 5-9. If the medium temperature is higher, our company can also customize hot water submersible pumps and high temperature resistant submersible pumps.

2. For pumps without external circulation cooling system, the motor part exposed to the liquid level does not exceed 1/2.

3. Under normal circumstances, the pump must be used within the normal use head range (usually not less than the rated value and 70% to ensure that the motor is not overloaded. If it needs to be used within the full head range, it should be noted separately when ordering, so that the manufacturer manufacture.

4. The pump motor current must not exceed the rated current of the motor during operation.

Installation steps ofsuper flow submersible pump

(1) Pouring concrete foundation.

The foundation of the unit is usually poured with C15 or C20 concrete, and the construction is constructed by one-step pouring method. In order for the foundation to bear greater load, the foundation is usually made into a prism shape with a small top and a large bottom, or it is poured into a whole with the bottom plate of the sump (pit). The top surface of the foundation should be level, and anchor bolts should be embedded.

(2) Installation of guide rod and pump seat.

泵的扬程基地和缓慢雷竞技官网最新版降低但书dation of the unit. The bolt holes on the pump base are facing the anchor bolts embedded in the foundation. After the pump base is leveled with a level, tighten the anchor bolts. The bottom of the guide rod is connected with the pump seat by thread, bolt or plug-in type, and the top is connected with the support frame. The support frame and the guide rod are usually made of carbon steel pipe, stainless steel or galvanized steel pipe.

(3) Installation of the pump body.

Lift the pump body, place the coupling device (coupling device, water pump and motor are usually made as a whole device) into the guide rod, and slowly lower the pump body along the guide rod until the coupling device is connected to the outlet elbow on the pump base , The outlet pipe of the water pump must coincide with the center line of the inlet of the outlet elbow.

As soon as the series of Small But Power Mini Air Pump 2.5W for Tanks were launched, they achieved very good results in the market and sales continued to hit new records. We have won the plenitudinous entrust of customers at home and abroad with our scientific and standardized management system and warm and thoughtful service. We always adhere to the service concept of maximizing the interests of customers, serve attentively, and customer first!